X6R-FX – NETWORK CONVERTER UNIT with Ethernet – AD/DA Converter for Optocore and SANE

Conception: 12 in 1, the X6R is a converter unit with the highest degree of flexibility concerning the I/O configuration. Six different card types enable to customise the card slots on the rear of the device, the conversion of analogue signals - 16 inputs, 16 outputs, 8 inputs and 8 outputs or dual microphone inputs with two independent adjustable preamps - to AES/EBU is provided as well as the sample rate conversion for AES/EBU. Twelve different versions are available. The AES/EBU card could be set from 16 channels to 8 channels in combination with mic IN, line IN or line OUT card and IN/OUT configuration can be changed in groups of 8 channels Audio and Data is exchangeable from OPTOCORE to SANE and vice versa. The X6R is especially designed for rack mounted applications and permanent installation. All cards are equipped with Euroblock connectors. With the other Optocore or SANE devices, the X6R-FX offers a great flexibility to build the network exactly suiting an application's need. These common installation interfaces provide a simple and cost-efficient connection to other audio equipment.

X6R-FX:

• 16 channel converter unit in a 1 RU enclosure
• Card slots for customized I/O configuration
• 4 types of cards with Euroblock connectors:
  - 8 mic inputs
  - 8 line inputs
  - 8 line outputs
  - 8 mic inputs with two independent preamps each
• 8 AES/EBU Input with sample rate converter
• 8 AES/EBU (16 audio channels) switchable in Groups of 4 to IN or OUT-> could be set to 8 channels in combination with AD or DA cards

• Sample rates up to 192 kHz
• 2 optical 2 Gbps LINK interface with duplex LC-connectors
• 2 RJ45 Links for SANE and 10 Mbit or 100 Mbit Ethernet
• 2 RJ45 interfaces for 10 Mbit or 100 Mbit Ethernet
• Mic inputs with selectable gain (0 dB to +70 dB in true analogue 1 dB steps) and 48 V phantom power
• Sub D Connector with four RS485 interfaces for the exchange of control data. (e.g. RS422, RS485, DMX, MIDI) or GPI/O
• Word clock IN and OUT
• Embedded internal word clock for stand-alone applications
• USB, RS232 and LAN port for configuration and control
• Full remote access with OPTOCORE CONTROL software
• Upgradeable internal logic
• Comprehensive status control via LED banks on the front
• Dual power supply with automatic switchover available